Factory Reset From Menu

Sometimes your monitor will require a factory reset to restore to factory default. This could be due to many reasons, the most common is Wi-Fi connection issues.

To enter the menu, press both buttons on top of the monitor together. The LED on the bottom left will turn solid purple.

From the Main Menu, use the white button to scroll down to Administrative Activities, then use the blue or black button to select it. Then use the white button to scroll down to Factory Reset, use the blue or black button to select it. Your device will restart and display "Factory Resetting Device".

If on your monitor, you see "policies", press the white button firmly, this will take you back to the sub menu, then use the white button to scroll down to "Up one level". Then follow the steps to get to Administrative Activities.

Main Menu Item	Sub Menu Item	Description
Read Now		Takes a reading.
Travel Mode		Light will remain solid purple when selected Takes offline readings and updates the screen. Will beep at you when/if the sensor goes out of range To leave Travel mode, press both buttons again
View Configurations	View Environment Policies	View the parameters of the environment policies attached to your sensor(s).
	View Connected Sensors	shows the serial number of the connected sensor(s)
	View Monitor Settings	Sound on Warning/Critical
	View Network Settings	Wi-Fi Network Signal Strength IP Address of monitor MAC address Gateway DNS Server
	View Version	Firmware version Device OS Free RAM Free SD Space
	Up One Level
Administrative Activies	Connect Wi-Fi Network	Add additional Wi-Fi networks
	Clear Wi-Fi Credentials
	Synchronize Time
	Boot into Safe Mode
	Factory Reset
	Up one Level (back)
Help
Exit

If additional assistance is required, please email stattemp@gohcl.com or use the Contact Us button to reach out directly.