The Monitor Menu

The Stat Temp monitor includes a menu that allows you to access certain features, such as Travel Mode or Read Now, or allow you to make changes such as update wifi or perform a factory reset.

Press the white button to force a 'read now'.
Press the black button to access the current sensor's environment policy
Press both the white and the black buttons together to access the menu - the LED will turn a solid purple
- The white button then pages through the options
- The black button selects the option
To exit the Menu, press both buttons at the same time again.

Use the white button to scroll through the options in the menu, and use the black button to select your menu item.

Main Menu Item	Sub Menu Item	Description
Read Now		Takes a reading.
Travel Mode		Light will remain solid purple when selected Takes offline readings and updates the screen. Will beep at you when/if the sensor goes out of range To leave Travel mode, press both buttons again
View Configurations	View Environment Policies	View the parameters of the environment policies attached to your sensor(s).
	View Connected Sensors	shows the serial number of the connected sensor(s)
	View Monitor Settings	Sound on Warning/Critical
	View Network Settings	Wi-Fi Network Signal Strength IP Address of monitor MAC address Gateway DNS Server
	View Version	Firmware version Device OS Free RAM Free SD Space
	Up One Level
Administrative Activies	Connect Wi-Fi Network	Add new WiFi credentials, does not erase the SD card
	Synchronize Time
	Boot into Safe Mode
	Factory Reset
	Disable Audible Alerts	Will disable system alerts - wifi and battery. Audible excursion alerts are managed on the website.
	Disable Auto Reboot	Stat Temp monitors auto-reboot every three hours. This option will disable that option.
	Up one Level (back)
Help
Exit