Viewing Sensors on the Dashboard

When you first log in, the dashboard will be displayed, showcasing all sensors assigned to you. Immediately visible are the latest readings and statuses for your sensors.

The dashboard features circle indicators:

Green indicates that the sensor is within the designated range
Yellow indicates a warning state
Red indicates a critical state
Blue indicates two missed check-ins
Greyed-out box indicates maintenance mode.

At the bottom of the sensor card, the high and low temperatures of the last 24 hours are displayed. Below the temperature and humidity details, you will find icons that provide additional sensor information.

Sensor Actions:

If you need to take some quick actions with your sensor, you can click the 3 dots ( ⋮ ) on the sensor card, it will open the Sensor Action menu. From there you can select any of the following:

Show - take you to the sensor show page
Edit - take you to the sensor edit page
Replace - walk you through replacing a sensor
Remove - removes the sensor
Enable/Disable Maintenance Mode - turn on or off maintenance mode
Request A Reading - Requests a reading
Purge Readings - delete all readings for that sensor
View Environment Policy - shows the environment policy attached to that sensor.